<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
	<channel>
		<title>www.environmental-lighting.co.uk Blog</title>
		<link>http://www.environmental-lighting.co.uk</link>
		<description>Blog for www.environmental-lighting.co.uk</description>
		<pubDate>Wed 10 Mar 2010 14:11:19</pubDate>
		<language>en</language>
		<item>
	<title>Energy Saving Bulb Disposal Guide</title>
	<link>http://www.environmental-lighting.co.uk/blog/read_6497/energy-saving-bulb-disposal-guide.html</link>
	<description><![CDATA[

				
                
                    


                        
	
	Energy Saving Bulb Disposal Guide
                    
                    
                        
                        
                        
                        
                            
                            0
                            
                            
                            
                            
                             
                     ...]]></description>
	<pubDate>Thu 17 Sep 2009 0:00:00</pubDate>
</item>
<item>
	<title>I P Rating ( Ingress Protection )</title>
	<link>http://www.environmental-lighting.co.uk/blog/read_5712/i-p-rating-ingress-protection-.html</link>
	<description><![CDATA[



















	Ingress Protection IP Ratings (IP Codes)Ingress of liquid and/or solid 
particles into electrical equipment can not only be harmful to the equipment, it 
can be dangerous to the operator. Therefore when buying electrical equipment 
whether it be an electric motor, a light fiiting or an instrument, it is 
essential to know what degree of "ingress protection" or as it is sometimes 
called IP class, or IP rating the item offers.
	The applicable Europea...]]></description>
	<pubDate>Wed 12 Aug 2009 0:00:00</pubDate>
</item>
<item>
	<title>Bathroom Lighting</title>
	<link>http://www.environmental-lighting.co.uk/blog/read_3218/bathroom-lighting.html</link>
	<description><![CDATA[
IP Ratings

Bathroom Zones



	

		
			 

	Zone 0 and Zone 1 Regulations
		Zone 0 is inside the bath or shower itself. Any fitting used in this zone must be low voltage (max 12 volts) and be rated at least IP67 which is total immersion proof.

	Zone 1 is the area above the bath to a height of 2.25m from the floor. In this zone a minimum rating of IP44 is required. If the fitting is 240 volts, a 30mA residual current device (RCD) must also be used to protect the circuit in this zo...]]></description>
	<pubDate>Mon 6 Apr 2009 0:00:00</pubDate>
</item>
	
	</channel>
</rss>
